Table of Contents
Advertisement
Using the Web Configuration (continued)
Configuration > Wireless
Wireless Interface
Connection Mode:
Infrastructure (default):
router in a WLAN.
Ad-Hoc:
SSID:
Assign the SSID in this box. You can manually input the name or select one
from the pull-down menu. To search the available print server within the network,
click the Site Survey button.
Wireless Channel:
setting is 6.
Transmission Rate:
default setting is Fully Automatic.
WEP Encryption
This field allows you to configure the settings of data encryption. Please remember
that the WEP key must be set before the data encryption is enforced.
WEP Encryption:
encryption setting.
WEP Key Format:
(ASCII characters) or HEX (hexadecimal digitals). 64-bit WEP encryption uses a 10
hexadecimal character key. The WEP encryption key must match the WEP settings
on your AP or wireless router to connect properly.
Then, enter the key(s) for the network in the Key box (1-4).
Advanced Setting
Beacon Interval:
Preamble:
This option allows you to set the length of the preamble. Setting options
are:
Long:
Short:
Authentication Type:
Open System, Shared Key, and Both.
Select one of two connection modes:
Connect to wireless clients in the Peer-to-Peer mode.
Select the channel from the pull-down menu. The default
Select the data transmit rate from the pull-down menu. The
This option allows you to select Disable, 64-bit, and 128-bit for
You can decide the network key to be encoded by ASCII
Enter the number for the beacon interval in milliseconds.
set to 144 bits
set to 72 bits.
You can set the authentication type by selecting the settings:
Connect to an existing wireless AP or
18
Advertisement
Table of Contents
