Table of Contents
Advertisement
OPERATION
TRANSOM
ANGLE
ADJUSTMENT
CR type/XH type)
UNLOCKED
POSITION
ADJUSTING
ROD
LOCKED
POSITION
TO L&K
(SH type/LH type)
ADJUSTING
ROD
1
'..... Ic-- 1
4L
0
.
.
.
LOCKED
POSITION
t
PINCH
The transom angle adjusting rod limits the
tilt angle of the outboard motor when
fully lowered.
Proper adjustment prevents the outboard
motor from being trimmed too low (p.
47).
To adjust, first tilt the outboard motor so
it is not resting on the rod.
(R type/XH Type)
Push the rod in and turn the end of the rod
up, so the latch will fall into line with the
rod.
(SH/LH Type)
Pinch the end of the rod.
Remove the rod and reinsert it in the
desired position.
(R type/XH Type)
Push the rod in and turn the end of the rod
down, so the latch will fall to the locked
position. Then release the rod.
(SH/LH Type)
Push the rod in and hook the end of the
rod. Then release the rod.
lNoTlCEl
Do not allow water to enter the idle
exhaust port or the engine can be dam-
aged
IDiE
EXHAUST
PORT
33
Advertisement
Table of Contents
