Ac Power - RCA 4-INCH COLOR TFT LCD TV Owner's Manual

16-3055A.fm Page 5 Wednesday, May 24, 2000 9:01 AM
Warning: Dispose of old batteries promptly
and properly. Do not burn or bury them.
Caution: If you do not plan to use the TV
with batteries for a month or longer, remove
the batteries. Batteries can leak chemicals
that can destroy electronic parts.
To access the
EARPHONE
jacks on the back of the TV, use a flat-
IN
blade screwdriver to unscrew the locking
screw.
Remove the cover and connect the adapter
or earphone plug. Store the cover when you
are using the jacks and securely replace it
when the jacks are not in use.

AC Power

Cautions:
, , and
DC 6V IN AV
Set the adapter's voltage switch to 6V. Plug
the adapter's barrel plug into the TV's
IN
adapter into a standard AC outlet.
Notes:
You must use a Class 2 power
!
source that supplies 6V DC
and delivers at least 1,000
mA. Its center tip must be set to positive
and its plug must fit the TV's
jack. Using an adapter that does not
meet these specifications could damage
the TV or the adapter.
• Always connect the AC adapter to the
TV before you connect it to AC power.
When you finish, disconnect the
adapter from AC power before you
disconnect it from the TV.
jack. Then plug the other end of the
• Do not leave the adapter plugged into
the AC outlet or connected to the TV
when you are not using the TV.
• Always unplug the adapter from the AC
outlet first.
• Internal batteries automatically
disconnect when you plug an adapter
into the jack.
DC 6V IN
• The adapter might become warm after
extended periods of use.
DC 6V IN
DC 6V
5