Mounting The Outdoor Sensor - Radio Shack In/Out Thermometer with Indoor Humidity Gauge Owner's Manual

3. Using a screwdriver, drive the screw
into the wall, letting the head extend
1
/ inch from the wall.
8
4. Align the keyhole slot on the back of
the thermometer with the screw
head, then carefully push the ther-
mometer onto the screw head and
slide it down into place.

Mounting the Outdoor Sensor

You need a nail, wood screw, or masonry
screw (not supplied) with a head larger
than the small loop on the wire bracket to
mount the outdoor sensor.
Screw
Preparation
W ire
Bracket
Outdoor
Sensor
11