Dell PowerVault MD3200 Deployment Manual page 73

NOTE:
Configure the management station you are using for network
communication to the same IP subnet as the PowerVault MD36
1 Establish an iSCSI session to the PowerVault MD3600i RAID storage array.
2 Restart the SMagent service.
3 Launch MDSM.
If this is the first storage array to be set up for management, the Add New
Storage Array window is displayed. Otherwise, click New.
4 Select Manual and click OK.
5 Select In-band management and enter the host server name(s) or IP
address(es) of the host server that is running the MD Storage Manager
software.
6 Click Add.
In-band management should now be successfully configured.
Appendix—Manual Configuration of iSCSI
x
0i host ports.
73