Dell PowerVault MD3200 Deployment Manual page 68

7 The final configuration contained in the /etc/iscsi/iscsid.conf file might
look like this:
node.session.auth.authmethod = CHAP
node.session.auth.username = iqn.2005-
03.com.redhat01.78b1b8cad821
node.session.auth.password
node.session.auth.username_in= iqn.1984-
05.com.dell:powervault.123456
node.session.auth.password_in
discovery.sendtargets.auth.authmethod
discovery.sendtargets.auth.username = iqn.2005-
03.com.redhat01.78b1b8cad821
discovery.sendtargets.auth.password
discovery.sendtargets.auth.username = iqn.1984-
05.com.dell:powervault.123456
discovery.sendtargets.auth.password_in =
test1234567890
If you are using SUSE Linux Enterprise Server SP3 using the GUI:
1 Click DesktopYaSTiSCSI Initiator.
2 Click Service Start, then select When Booting.
3 Select Discovered Targets, then select Discovery.
4 Enter the IP address of the port.
5 Click Next.
6 Select any target that is not logged in and click Log in.
68
Appendix—Manual Configuration of iSCSI
= password_1
= test1234567890
=
=
CHAP
password_1