Installing the Hard Drive
1.
Place the hard drive assembly into its slot on the computer.
2.
Install:
a) battery
b) base cover
3.
Follow the procedures in
Removing the Coin-Cell Battery
1.
Follow the procedures in
2.
Remove :
a) base cover
b) battery
3.
Perform the steps as shown in the illustration:
a) Disconnect the coin-cell battery cable from its connector on the system board.
b) Unroute the coin-cell battery cable from the routing channel.
c) Lift and remove the coin-cell from the computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into its slot on the computer.
2.
Route the coin-cell battery cable along the routing channel.
3.
Connect the coin-cell battery cable to its connector on the system board.
4.
Install :
a) battery
b) base cover
5.
Follow the procedures in
Removing the WLAN Card
1.
Follow the procedures in
2.
Remove:
a) base cover
b) battery
3.
Perform the steps as shown in the illustration:
16
After Working Inside Your Computer.
Before Working Inside Your Computer .
After Working Inside Your Computer.
Before Working Inside Your Computer .