TDK Mojo User Manual page 12

PLAYBACK QUICK STEPS
To power on MOJO 1:
• Hold down ON/PLAY/PAUSE for a few seconds until the INT LED lights. After being powered on, MOJO 1 automatically will
begin playback from the last selected playback source.
To power off MOJO 1:
• Hold down STOP for a few seconds.
To play from MOJO 1's internal memory:
1. Power on MOJO 1.
2. Repeatedly press SOURCE until INT lights.
• Playback will begin.
NOTE : See "Transferring Music to MOJO 1" for instructions on loading tracks onto MOJO 1's internal memory. Tracks must be
loaded onto MOJO 1's internal memory to enable playback from internal memory.
To play from a memory expansion card (MMC or SD) that's inserted into MOJO 1:
1. Power on MOJO 1.
2. Repeatedly press SOURCE until EXT lights.
• Playback will begin.
NOTE : See "Transferring Music to MOJO 1:" for instructions on loading tracks onto a memory expansion card. Tracks must be
loaded onto the memory expansion card to enable playback from the card.
To play FM radio:
1. Power on MOJO 1.
2. Repeatedly press SOURCE until FM lights.
• Playback of a preset radio station will begin.
To record FM radio to MOJO 1's internal memory:
1. Put MOJO 1 in FM playback mode and tune the desired radio station.
2. Hold down ON/PLAY/PAUSE for a few seconds until the FM and INT LEDs begin flashing quickly.
• Recording will begin.
3. Press STOP to stop recording.
NOTE : MOJO 1 will automatically stop recording when its internal memory is full.
NOTE : If MOJO 1 has less than 3 MB of available internal memory, recording FM radio will not be possible.
19
USING MOJO 1 AS A DATA STORAGE DEVICE
MOJO 1 can function as a portable data storage device, allowing you to load non-audio files, such as text documents into its
memory. This can come in handy when you need to transport a data file from one location to another.
NOTE : While MOJO 1 will appear under My Computer as a USB mass storage device, copy protection prevents using the Windows
interface to transfer audio files to MOJO 1. It is not possible to copy audio files from MOJO 1 to a PC.
To load a non-audio file(s) into MOJO 1's memory:
1. Power ON MOJO 1 and using the USB cable, connect MOJO 1 to the PC where the desired non-music file is located.
2. In Windows, double click MY COMPUTER.
• The My Computer window will open.
3. In the My Computer window, double click the REMOVABLE DISK icon.
• The REMOVABLE DISK (MOJO 1's memory) window will open.
4. Drag and drop or copy and paste the file(s) from any location on your hard drive to the REMOVABLE DISK window.
NOTE : MOJO 1 will appear as two separate drives. Each will be listed as a REMOVABLE DISK. One REMOVABLE DISK is MOJO 1's
internal memory, the other is MOJO 1's memory card slot. The memory card slot will only be accessible if a memory card is loaded.
To retrieve a non-music file(s) from MOJO 1's memory:
1. Power ON MOJO 1 and using the USB cable, connect MOJO 1 to the PC to which you wish to transfer the file(s).
2. In Windows, double click MY COMPUTER.
• The My Computer window will open and should contain a REMOVABLE DISK icon.
3. In the My Computer window, double click the TDK MOJO 1 EXT icon.
• The REMOVABLE DISK window will open.
4. Drag and drop or copy and paste the file(s) from the REMOVABLE DISK window to the location on the PC's hard drive where
you wish to store the file(s).
• The file(s) will be transferred to the PC's hard drive.
NOTE : MOJO 1 will appear as two separate drives. Each will be listed as a REMOVABLE DISK. One REMOVABLE DISK is MOJO 1's
internal memory, the other is MOJO 1's memory card slot. The memory card slot will only be accessible if a memory card is loaded.
20