Rear Panel Features; Power Switch; Input Jack - SWR Blonde On Blonde Owner's Manual

Input Impedance:

40k ohms

System Distortion:

0.15% @ 1KHz

SPEAKER SECTION SPECIFICATIONS

Speaker Complement:

(1) Custom SWR 12" speaker

(1) High End Super Tweeter

Frequency Response:

-3db @ 78Hz to 13.5KHz

SPL:

96db @ 1W1M

Power Handling:

200 Watts RMS

Impedance:

8 Ohms

Dimensions:

20" H x 14.5" W x 14.5" D

Weight:

40 lbs

REAR PANEL FEATURES

Pressing the Power Switch to the ON position activates the Blonde On Blonde's electronics as indicated by the

red LED lighting.

Note to players using the Blonde On Blonde in conjunction with the California Blonde: Always turn off the Blonde

On Blonde before powering down the California Blonde to avoid hearing power supply delay transients (this is not

necessary when using the Blonde On Blonde as a speaker only).

The Blonde On Blonde's Input Jack can be thought of as a "power amp in" and is intended for connection to an

onboard (such as from an active instrument) or outboard (such as a rack-mountable) preamp. This jack accepts

any standard shielded instrument cable that connects via 1/4" plugs. The high input impedance assures perfect

compatibility for all active/passive/magnetic and piezo pick-up systems.

2 • BLONDE ON BLONDE OWNER'S MANUAL

Table of Contents