Standard Horizon HX270E Owner's Manual page 23

5.15.1 bEP (K
EY
Function: Enable/Disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
5.15.2 dUL ( DW D
Function: Selects the Dual Watch scanning display mode.
Available Values: nor (Normal)/SPL (Special)
Default: SPL (Special)
When "Special" is selected, channel number which is the LCD shows re-
ceived channel.
5.15.3 LP ( L
AMP
Function: Select the LCD/Keypad Lamp mode.
Available Values: kEy (KEY)/Cnt (Continue)/oFf
Default: kEy (KEY)
kEy: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
Cnt: Illuminates the LCD/Keypad continuously.
oFf: Disables the LCD/Keypad illumination.
Key
5.15.4 SnL ( S
CAN
Function: Enable/Disable the Scan lamp while scanning is paused.
Available Values: ON/OFF
Default: ON
5.15.5 SCn ( S
CAN
Function: Select the display mode while scanning.
Available Values: nor (Normal)/SPL (Special)
Default: nor (Normal)
nor: The channel number changes when scanning.
SPL: The channel number only changes when the radio receives a trans-
mission. This lets you see the last channel on which someone called.
HX270E
B )
EEP
)
ISPLAY
)
M
ODE
Continuous
)
L
AMP
)
D
ISPLAY
Normal
Off
Special
Page 21