Honda EX350 Owner's Manual page 17

Connections for standby power:
if
the generator will he used to supply power to a building's electrical
system as an alternative
to
utility company power, a double-throw transfer
switch must be Installed before connecting the generator. The transfer
switch disconnects the utility lines from the building's electrical system
when the generator is connected.
A transfer switch is avallabfa
from
your euthorized Honda generator dealer.
Installation must be performed by a qualified electrician and must comply
with all applicable
laws
and elacwfcal codes. Consult the dealer regarding
your specific power requirements and generator suitability for your standby
pow& needs.
.:
m Connectforts far standby power to a building% electrical
system
must be made by a qualified electrician snd must comply with
ail applicable
laws and electrical codes. Improper connections can allow electrical cur-
rent from the generator to backfeed lnto the
utiiitv lines. Such
backfeed
may electrocute utility company workers or others who contact the
lines
during
a power outage, and when utility power is restored, the generator
may explode, burn, or cause fire8 in the building's electrical system.
15