Table of Contents
Advertisement
If you expand out the device subkey, you'll find another subkey called Device Parameters. Click it to select it and look in
the right pane. (Figure A.19)
Figure A.19
In the example above, the SidSpeed key actually exists, but it is set to the incorrect speed. Double click on the SidSpeed
value and a window will open. In that window will be a field called Value Data. If that value is a 0 or 1, CHANGE IT to a 3
and press OK. If you do not see the SidSpeed value at all, keep reading. (Figure A.20)
Figure A.20
Appendix - Windows 1394a Bandwidth Limiting Issue (Windows XP-Vista)
47
Advertisement
Table of Contents
