Configuring The Network Settings On The Digital Receiver; Making A Network Profile - Topfield TF 7100 HD PVRt User Manual

58 Accessing the digital receiver via Networking
8.2 Configuring the network settings on the digital receiver
8.2.1 Making a network profile
Make sure that the digital receiver is connected to your router
before configuring the network settings on the digital receiver.
You may make either a wired or wireless connection as you are
pleased.
You will need to obtain a network cable to use
wired connection. Plug one end of the cable into
the LAN port on the digital receiver, and plug the
other end into an available port of the router.
If you will use wireless connection, plug the wire-
less module into the USB port on the back of the
digital receiver.
NOTE
You cannot use both wired and wireless connections at the
same time.
You should make at least a network profile with which you can
connect the digital receiver to your home network.
Select the Installation
Setting menu. You should see a
screen like the left figure.
You may choose any entry to
make a network profile.
Network