IBM ThinkPad X30, ThinkPad X31 (MT 2672 Manual page 66

Hide thumbs Also See for ThinkPad X30, ThinkPad X31 (MT 2672:
Table of Contents

Advertisement

Symptom-to-FRU index
Symptom or error
02F6
Software NMI failed
02F7
Fail-safe timer NMI failed
1801
Attached docking station is not
supported
1802
Unauthorized network card is
plugged in—Power off and
remove the miniPCI network
card.
1803
Unauthorized daughter card is
plugged in—Power off and
remove the daughter card.
1810
Hard disk partition layout error
62
ThinkPad X30, X31 (MT 2672/2673)
FRU or action, in sequence
1. DIMM.
2. System board.
1. DIMM.
2. System board.
Shut down the computer and
remove it from the docking
station.
1. Remove Mini PCI network
card.
2. System board.
1. Remove the daughter
card that you installed.
2. System board.
1. If the Access IBM
Predesktop Area has been
previously disabled, then
go the the IBM BIOS
Setup Utility by pressing
F1 to open the IBM BIOS
Setup Utility. Select
Security->IBM Predesktop
Area-> Access IBM
Predesktop Area. Set this
item to Disabled. Save
and exit.
2. If the Access IBM
Predesktop Area has not
been previously disabled,
press Enter to load Access
IBM Predesktop Area. Then
run RECOVER TO
FACTORY CONTENTS in
Access IBM Predesktop
Area.
3. If item 2 failed, press F3 in
welcome screen in
RECOVER TO FACTORY
CONTENTS. Run FDISK,
and then delete all
partitions. Run RECOVER
TO FACTORY CONTENTS
in Access IBM Predesktop
Area again.
4. If item 3 failed, select
CD-ROM boot in Startup in
Access IBM Predesktop
Area. Boot from Recovery
CD and perform full
recovery from it.
5. If item 4 failed, replace the
hard-disk drive.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents