Rear Panel - Sony Ipela SSM-L24F1 Operation Manual

5 1 (Power) switch/indicator
Use this switch to turn on the monitor.
Press this button again to turn off the monitor.
The indicators display the status of the power.

Rear Panel

SSM-L24F1/L22F1
1 AUDIO-IN (audio input) connector (mini jack)
Inputs stereo audio signals.
2 VIDEO-IN (video input) connector (BNC type)
Inputs analog composite video signals.
3 S-VIDEO (S-video input) connector (S
connector)
Inputs analog video signals.
4 RS-232 (RS-232C) connector (9-pin D-sub)
This port is not for customer use; it is intended for
factory service use only.
5 VGA (HD-15) connector (15-pin mini D-sub)
Inputs analog RGB signals.
CAUTION
When you connect the Analog RGB cable of the
unit to peripheral device, use the supplied cable to
prevent malfunction due to radiation noise.
6 DVI input connector (19-pin DVI)
Inputs DVI-D signals.
7 HDMI input connector (HDMI-A)
Inputs HDMI signals.
8 Cable clamp attachment hole
Attach the cable clamp here.
9 DC 12V (power) connector (DC 12 V)
Connect the DC connector of the supplied AC
adaptor here.
10
Features and Functions
1 2 3 4 5 6
Indicator Status
Lit (red) Power off
Lit (green) Power on
Blinking (red) Power saving mode
7 8 9