Control Panel; Input And Output Connectors - Samsung SVP-5000N Operation Manual

Control Panel

You can find the same function buttons on
the remote control supplied. The buttons
perform the same function as buttons on this
control panel.
POWER button
Used to turn power on and off.
IRIS
Used to adjust the brighteness
of the image on the screen.
FOCUS
Used to adjust the focus
ZOOM
Used to magnify or reduce the
image of an object on the screen.

Input and Output Connectors

(available for SVP-5100N, SVP-5200N, SVP-5100P, SVP-5200P)
Used to be controlled by PC and send image data to PC.
RS-232C Jack
Used to be controlled by PC
through serial port.
POWER IN connector
Connects to AC power
outlet (100-240V AC,
50/60Hz, 1A).
Used to send video signals from your
Video Presenter to a TV equipped with
/ button
/ button
manually.
/ button
PC INTERFACE connector
PC interface
POWER IN
RS232C
S-Video out
Fuse box
S-VIDEO OUT jack
S-video input terminal.
POWER
IRIS AWC
FOCUS AF
ZOOM NEGA/POSI
VIDEO OUT 1, 2 jacks
Used to send video signal from your Video
Presenter to a TV or LCD projector. The
signal from these jacks are equivalent.
VIDEO IN jack
Used to receive video signal from another
AV device (such as VCR or camcorder).
To see the signal from this jack, press
INT/EXT button on the remote control or
OUT 1 OUT 2 IN
the control panel of this unit.
VIDEO
AUDIO
OUT 1 OUT 2 IN
AUDIO OUT 1, 2 jacks
Used to send Audio signal from your Video
Presenter to a TV or LCD projector. The
signals from these jacks are equivalent.
AUDIO IN jack
Used to receive audio signal from another
AV device (such as VCR or camcorder).
AWC button
Used to adjust white balance
automatically.
AF button
Used to adjust the focusing
automatically.
NEGA/POSI button
Used to project a negative film as a
positive one.
7