Page 1
SVP-6000N/P SVP-6000N/P HIGH RESOLUTION HIGH RESOLUTION VIDEO PRESENTER VIDEO PRESENTER User’s Manual User’s Manual Before attempting to operate this product, please read the instructions carefully.
Special features Thank you for purchasing this product. This product is a high resolution video presenter that can project all kinds of data on a PC monitor, a TV, or a projector with simple manipulations. page1 12X zoom lens (can be used for the materials with sizes from B4 to film) By adopting 12X super optic angle zoom lens that it is possible to shoot material in the size of a film to B4.
Set preparation Basic connecting methods To view an image projected on the video presenter through a PC monitor or a projector To view an image on a TV screen or a monitor while listening to the sound from a microphone...
X-ray film etc. at a medical conference or a doctors' association in the order of file. Demonstration or exhibition By connecting to a large projector, it can produce dynamic images at a new product demonstration, an exhibition, or an event. Supplied accessories User’s Manual...
Names and functions of each part Front side Lens Can rotate to the front and back. Remote control signal Main control panel receiver (see next page) Main support Document plate (built-in lower lamp) Main lock button Press to move the main support. Lamp unit (upper lamp) page4...
Use this to select internal or external image INT: to view the image on this product. EXT: to view the VGA output from another device on a PC monitor or a projector by connecting it to this product. Use this to control the color automatically Red/Blue control...
Use this to connect USB cable when transmitting image by USB port. VGA video output Connect this to the RGB input terminal of a PC monitor or a projector. S-video output This is the video output terminal connecting to a TV that has S-video input terminal.
- INT: to view an image projected on this product - EXT: to view another VGA output though a PC monitor or a projector by connecting it to this product. FOCUS F button Use this to focus on area far away...
Press the main lock button and raise the main support Turn the lens area to face downward Connect the power cable to the main unit and the outlet. For 230V For 120V Set preparation Raise the lamp unit until it is convenient for use, and set it to the center of the document plate.
• Microphone is not supplied. Use one purchased from an audio shop. • When a microphone is used, the image and sound are produced simultaneously through the projector. Thus it can be very useful for a demonstration or an exhibition.
Basic connecting methods To view the VGA output of an external device through a PC monitor or a projector. Connect to the VGA input terminal PC monitor, projector, etc. To connect to a PC for USB communication Connect to the USB port of the PC •...
• RS-232 operation program is not supplied. To connect with a mouse Connect to the VGA input terminal PC monitor, projector, etc. • It supports mouse pointer function and enables effective presentation. Also, various colors and shapes of mouse pointer are available. page11...
Please check . Is the power connected properly? . Is the desired device (PC monitor, Projector, etc.) connected to the output terminal correctly? Press the power button • The power button on the main unit can be pressed Place the material on the document plate and adjust the size of the image with the zoom button.
• EXT: to view the image and sound from an external VGA output device through a PC monitor or a projector connected to this video presenter If the <INT/EXT> button is pressed when another VGA output device is not connected, NO SYNC sign appears.
Methods of using various buttons for the screen control IRIS +/- • To adjust the brightness, press the [Iris +/-] buttons on the main control panel or the [Iris +/-] buttons on the remote control. [Iris +]: when the subject is too dark. [Iris-]: when the subject is too bright.
Notes on operations / Storage after use Please note that any slides, pictures, documents that are protected under the copy right law can't be reproduced without permission. Wipe with dry and soft cloth Cover the product when not in use. Storage after use Turn the lens to make it parallel to the main support...
No image appears - Check if the resolution of the output device corresponds to that of the video presenter.(for example, when the maximum resolution of a projector is XGA and if the video presenter is set to SXGA, then no image appears.) - Check if the input selection of the output devic is appropriate.