Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press SRC to select TUNER source.
» [AUTO INSTALL -- PRESS PLAY --
STOP CANCEL] (press
automatic installation, or press
cancel) is displayed.
3
Press
.
» The unit automatically stores radio
stations with sufficient signal strength.
» After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
Turn on
•
Press .
» The unit switches to the last selected
source.
Switch to standby
•
Press
again to switch the unit to standby
mode.
» The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
•
Press and hold
seconds.
» [ECOPOWER] (Eco Power) is
displayed briefly.
10
EN
to start
to
for more than three
Tip
•
The unit switches to Eco Power mode after 15 minutes
in standby mode if no Apple device is docked to the
unit.
•
Press and hold
cannot switch the unit to Eco standby
mode if there is Apple device docked to the unit.
•
Press and hold
to switch the unit to standby mode
only if the unit is in working mode.
Switch between standby mode and Eco Power
mode:
•
In standby/Eco Power mode, press and
hold
to switch the unit to Eco Power/
standby mode.
Demonstrate the unit's
features
•
In standby mode, press
[WELCOME TO PHILIPS] (welcome to
Philips) scrolls from the right to the left on
the display, and then [DEMO ON] (demo
on) is displayed briefly.
» This system's features are displayed
one by one.
• To turn off the demonstration,
press
/MENU again.
Note
•
You can also press
off the demonstration.
/MENU.
on the main unit to turn on/ turn