Page 3
Connect the mains adapter to the socket on the left of the handset and an electrical wall socket. Charging bm35+1 (with charging stand) Connect the mains adapter to the socket on the rear of the charging stand and to an electrical wall socket.
You can press PTT to stop at the located channel. Please note: while searching battery consumption will be significantly higher than normal. 1. Press at the same time. The unit will start searching. 2. To stop scanning press www.doro.com...
Page 5
If selected a tone will be heard when the handset buttons are pressed, this can be switched on or off. 1. Press repeatedly until is displayed. 2. Scroll to the desired setting using =off, =on). 3. Press PTT to confirm. www.doro.com...
3. You can display a split time by pressing . Press again to revert to the ongoing timer. 4. Press to stop the timer. 5. Press to reset the timer. 6. Press until the display returns to the standby mode. www.doro.com...
9AM - 5PM Monday-Friday excluding Bank Holidays. Alternatively, E-mail on: tech@doro-uk.com You can contact us in writing: Consumer Support Group, Doro UK Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE, (regarding any Spares or Technical query), or Telephoning (Spares only): 01527 584377 Web site: www.doro-uk.com...
Page 8
�� ������������������������ �� ���������������� ������� �������������������������� �� ������������������������ �� ���������������� ������� �������������������������� �� ���������������� ������� �������������������������� * These channels are the repeater access channels (�� mode). ** Designated emergency channels. ! Speech telephony is not permitted on these channels. www.doro.com...
Need help?
Do you have a question about the BM35 and is the answer not in the manual?
Questions and answers