18 Dimm Slots (9 Per Cpu Node) - HP ProLiant DL380 Generation 7 (G7) Quickspecs

QuickSpecs
Memory
1 DIMM Per Channel 1333
2 DIMM Per Channel 1066/
1333*
3 DIMM Per Channel 800**
* 2DPC: LV runs default 1333 at 1.5V. Use RBSU Power Management option to select 1066 at 1.35V. Std runs at 1333.
** 3DPC: LV/Std voltage runs at 800
NOTES:
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower
DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels,
you run at 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
Chnl 2
Chnl 3
Standard memory configuration (1 CPU model)
6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
1333 1333 1066
1333 1333 1066
800** 800 800

18 DIMM SLOTS (9 per CPU node)

CPU1
slot # population order
1 G
2 D
3 A
4 H
5 E
6 B
7 I
8 F
9 C
DA - 13595 Worldwide — Version 65 — March 25, 2013
HP ProLiant DL380 Generation 7 (G7)
1333 1333 1066
1066/ 1066/ 800
1333* 1333*
800** 800** n/a
CPU2
slot #
1
2
3
4
5
6
7
8
9
1066 1066 1333
800 800 1333
n/a n/a n/a
population order
G Chnl 1
D
A
H Chnl 2
E
B
I Chnl 3
F
C
1333 1333
1333 1333
n/a n/a
Page 41