Smart Array P410I Controller - HP ProLiant DL380 Generation 7 (G7) Quickspecs

QuickSpecs
Technical Specifications
Smart Array P410i
Controller
Client Browser Support
Command Line Support
Security
Directory Support
Services
Driver Support
Management protocols
supported
Dimensions
Disk Drive and Enclosure
Interface - transfer rate
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
Logical Drives Supported Up to 64 logical drives with cache
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support
DA - 13595 Worldwide — Version 65 — March 25, 2013
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Active Directory v1.0 (Windows 2003)
HP ProLiant iLO3 Management Controller Driver Package
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
Embedded
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
2 internal 4X connectors
DDR2-800MHz with 40 or 72-bit wide bus
x4 PCIe 2.0 provides 4GB/s maximum bandwidth
8 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Zero Memory RAID has no cache memory
40-bit 256MB ECC protected cache (battery upgrade available)
72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC
Zero Memory, Up to 2 logical volumes (8 physical drives)
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: RAID 6, 6+0 can be enabled with one of the following combinations:
256 MB cache, Battery kit and Smart Array Advanced Pack License key
option upgrades
512 MB BBWC/FBWC and Smart Array Advanced Pack License key option
upgrades
1G FBWC and Smart Array Advanced Pack License key option upgrades
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: A minimum or 256 MB cache is required to enable RAID 5, 5+0 support
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
HP ProLiant DL380 Generation 7 (G7)
Page 60