Adjusting The Steering Clutch Cable - Honda HP250 Owner's Manual

Adjusting the steering clutch cable
Steering control will be impaired unless both steering clutch cables are ad-
justed properly.
1. With the engine off, rock the power carrier forward and backward to find
the position at which each lever can be pulled Closest to the handle grip.
2. With each steering clutch lever fully gripped, check whether the clearance
between the projection on the lever and the handle grip is 20-25 mm
(0.78-0.98 in).
3. To adjust, loosen the lock nut with the lever gripped and turn the adjust
nut to get the prescribed clearance.
4. After the adjustment, tighten the lock nut.
20 - 25
mm
(0.78 - 0.98
in)
STEERiNG CLUTCH LEVER
38