Adjusting The Track Tautness - Honda HP250 Owner's Manual

Adjusting the track tautness
If the tracks are not properly taut, they may slip off the wheels or their
service life may be markedly reduced.
Inspection
Check that the slackness is between 8m12 mm (0.31~0.47 in) when a force
(about 10 kg, 22.1 lb) is applied to the middle of the tracks..
B-12mm
(0.31-0.47 in)
Track adjustment
1. Tip up the carrier.
Loosen the two lock nuts until there is space between the nuts and the
frame.
2. Tighten the inner lock nut by hand until it begins to contact the frame
surface.
3. While holding the inner lock nut with the 14 x 19 mm wrench, use the plug
wrench to tighten the outer lock nut as shown.
NOTE: Use the two 19 mm wrenches furnished with the power carrier as
illustrated.
TRACK TENSION SPRING
WRENCH