Leisure Unity Owner's Manual page 61

Electrical System Operation Unity Motorhome
Interior Lighting
Cabin lights Lights (1) - NOTE: This is a sealed LED
unit and must be replaced as complete unit.
Unclip the lens cover (2), remove the two screws (3) and
1
2
pull the light fitting out of the bodywork to gain access to
the fitting connectors. Disconnect the old and reconnect
the new light fitting. Insert the new light fitting into the
bodywork and secure with the two screws. Reinstall the
lens cover.
3
Interior Shower Light (4) - Unclip the cover (5) and
replace the bulb. Reinstall the cover.
5
4
Exterior Shower Light (6) - Unclip the cover and replace
the bulb. Reinstall the cover.
6
1-60