Table of Contents
Advertisement
Unity Motorhome
Electrical System Operation
Lighting Maintenance
The following procedures detail replacement of the coach
interior and exterior light bulb/light fittings.
Caution
1
2
Disconnect the chassis and coach batteries before
carrying out maintenance on the lighting system.
Exterior Lighting
Upper Running Lights (1) - NOTE: This is a sealed
LED unit and must be replaced as complete unit.
Remove the two screws (2) and pull the light fitting out
of the bodywork to gain access to the fitting connectors.
4
Disconnect the old and reconnect the new light fitting.
Insert the new light fitting into the bodywork and secure
with the two screws.
3
Side Marker Lights (3) - NOTE: This is a sealed LED
unit and must be replaced as complete unit.
Unclip the lens cover, remove the two screws (4) and
pull the light fitting out of the bodywork to gain access to
the fitting connectors. Disconnect the old and reconnect
the new light fitting. Insert the new light fitting into the
bodywork, secure with the two screws and reinstall the
lens cover.
6
Exterior Flood Light (5) - Unclip the top cover (6) and
replace the bulb. Reinstall the cover.
5
Rear Indicator/Reverse/Brake-Road Lights (7) -
Remove the three screws (8) and lens cover. Replace the
bulb and reinstall the lens cover with the three screws.
7
8
1-59
Advertisement
Table of Contents
