Johnson 9100 Assembly & Operating Manual

LASER LEVEL KIT
Model #9100/40-0909
ASSEMBLY & OPERATING MANUAL
ABOUT THIS PRODUCT
This leveling instrument uses a laser beam to plot distant points or lines.
The sleeve, or main body, of this spirit level is made of heavy-duty aluminum
and contains two level vials (horizontal and adjustable) as well as a
semi-conductor laser.
When installed on the leveling base and rotated 360-degrees, the laser
point (beam) of this level will always project at a constant horizontal. The
lightweight, yet sturdy, tripod quickly sets the laser point at the required
height. The laser point attachments included in the kit help find level and
plumb points easily. These attachments can be adjusted to any angle.
This level may be used both indoors and out. It is suitable for contractors
and DIY'ers alike.
ACCESSORIES INCLUDED
• 360-degree rotating leveling base
• Telescoping tripod
• 90-degree angle deviator (splitter) lens
• Line projection (spreader) lens
• Tinted goggles
• 2 AAA (1.5V) batteries
ATTENTION!
• Never look into the laser beam without certified eye protection.
Improper use of this laser level may cause injury to the eyes.
• Do not direct laser beam at another person or reflective surfaces.
Even a lower capacity laser beam may cause injury to the eyes.
• Store laser level out of children's reach. It is not a toy.
• Any change to the laser level resulting in increased performance is
strictly prohibted. Any claim for damages due to injuries resulting
from the non-compliance of these safety instructions will be refused.
• When storing laser level for time periods over 3 months, remove the
batteries from the unit in order to avoid damage due to battery leaks.
• This laser level does not contain any serviceable parts. Never open
the housing, as this will void the warranty.
2
ATTENTION!
© 2003 Johnson Level & Tool Mfg. Co., Inc.