Aci707 Audio Control Interface Front Panel Controls And Functions - Audio Technica SpectraPulse drm141 Setup And Operation

10
1
RS232 Connector for Encryption
Encryption LED (Red)
Line/Mic LEDs (Yellow/Orange)
aci707 Audio Control Interface Front Panel
Controls and Functions
2
1
Power Switch Press this button in to turn the unit on; the aci707 Audio Control Interface LEDs will light. Press
again to turn the unit off.
2
Use for optional encryption. (See SpectraPulse
3
When the Encryption LED is illuminated, the system is operating with encryption (the encryption
key has been set). (See SpectraPulse
to set the encryption key.)
4
Indicates whether the unit is operating with Line (yellow) or Mic (orange) level output.
LED indicators 5
There are seven vertical columns and four horizontal rows of LED indicators. The seven vertical
LED columns correspond to the seven microphone/transmitters, numbered 1 - 7 (or 8 - 14 if this
is the second aci707 unit in use.) One vertical column is designated for each of 7
microphone/transmitters.
Four horizontal rows of LEDs indicate the following information:
LINK (green LED):
MUTE (red LED):
CLOSURE (yellow LED):
LOW BATT (orange LED):
4 3 5
sep128 Encryption Owners Manual for instructions on how
™
The "Link" LED is illuminated when the Audio Control Interface
detects a transmitter on a particular channel.
The "Mute" LED is illuminated when a particular channel is muted.
The "Closure" LED is illuminated when the contact closure for a
particular channel is closed (indicating that the contact associated
with the channel is closed). If the yellow light is lit, the
corresponding microphone/transmitter is active.
The "Low Batt" LED is illuminated when a particular transmitter's
battery is low.
™ sep128 Encryption Owners Manual.)