Using The Voice Control System - Honda 2010 Odyssey Owner's Manual

Using the Voice Control System

You should use the voice control system
as much as possible, and consider
manual entry using the joystick as a
backup method of entry.
Most of the system's functions can be
controlled by voice commands activated
with the NAVI TALK button. To
control the navigation system by voice:
• Press and release the NAVI TALK
button.
• Wait for the beep.
• Give a voice command.
Once the microphone picks up your
command, the system changes the
display in response to the command and
prompts you for the next command.
Using the NAVI TALK button, answer
the prompts as required.
If the system does not understand a
command or you wait too long to give a
command, it responds with "Pardon,"
"Please repeat," or "Would you say
again." If the system cannot perform a
command or the command is not
appropriate for the screen you are on, it
sounds a beep.
Anytime you are unsure of what voice
commands are available on a screen,
you can always say "Help." The system
will then read the list of commands to
you.
When you give a command, the system
generally either repeats the command as
a confirmation or asks you for further
information. If you do not wish to hear
this feedback, you can turn it off.
However, hearing the feedback will
familiarize you with the way the system
expects commands to be phrased. See
the Voice Recognition Feedback
setting in Setup.
2010 Odyssey
Getting Started
If you hear a prompt such as "Please use
the touch screen to..." or "Please choose
an area with the joystick," the system is
asking for input that cannot be
performed using the voice control
system.
Navigation System 13