Honda 2010 Civic Coupe Owner's Manual page 89

09/07/07 14:03:10 31SVA640_088
3. Push and hold the front of the
master door lock switch on the
driver's door until you hear a click
(after about 5 seconds).
4. Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
To program the Park Lock mode:
Locks both doors when the shift lever is
moved out of the Park (P) position (A/T
vehicles only).
1. Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
Release the switch, and within 5
4.
seconds, turn the ignition switch
to the LOCK (0) position.
Door Locks
To program the Drive Lock mode:
Locks both doors when the vehicle's
speed reaches about 9 mph (15 km/h).
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
CONTINUED
83