Cleaning The Seat Belts - Honda 2010 Civic Coupe Owner's Manual

09/07/07 14:42:30 31SVA640_324
Replacing a High-mount Brake
Light Bulb
SOCKET
On DX, Canadian DX-G, and LX models
1. Open the trunk, then remove the
holding clips from the cover, and
remove the cover.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
5. Reinstall the cover, and tighten its
holding clips securely.
BULB
On EX, EX-L, and Si models
The high-mount brake light should
be replaced by your dealer.
Lights, Cleaning the Seat Belts

Cleaning the Seat Belts

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
LOOP
CONTINUED
319