Advertisement
ASSEMBLY INSTRUCTIONS
Hose (fig. 1)
Attach the connector to the coupling and
insert until it locks into place (fig. 1).
To remove, press the release button on the
connector and pull.
Telescopic tube (fig. 2)
The telescopic tube enables the hose to be
extended to the required length (fig. 2).
Tool compartment (Fig. 3)
The crevice tool and multipurpose nozzle
are housed in the tool compartment.
INSTRUCTIONS
Before using the appliance, extract the power cable completely and plug into the mains. To
rewind the cable, unplug and press the cable winder pedal
Operation
To turn the vacuum cleaner on, press the pedal switch
Electronic suction power regulation (fig. 10)
The electronic regulator enables suction power to be varied according to the type of surface to
be cleaned.
The maximum power of the appliance can therefore be exploited to vacuum dust from carpets
or hard floors (marble, ceramics, cotto, etc) and a lower suction power to clean curtains or other
light fabrics.
Mechanical suction power regulation (fig. 11)
The hose handgrip incorporates a mechanical suction regulator. This enables suction power to
be varied rapidly and practically by simply moving the slide.
12
USING THE CLEANING TOOLS
• Two position carpet/floor brush
Pos. 1: to clean hard floors, bristles out
(fig. 4).
Pos. 2: to clean carpets and rugs, brist-
les in (fig. 5).
• Crevice tool (fig. 6)
to clean radiators, corners, edges, dra-
wers, etc.
• Brush tool (fig. 7)
The brush tool is ideal for removing
dust from fabric, furniture books, cur-
tains, frames and clothing.
(H) (fig. 8) .
(G) lightly (fig. 9).
Advertisement
