Erecting And Folding The Carrier - Chariot Carriers cougar 2 Owner's Manual

X-country series
Hide thumbs Also See for cougar 2:
Table of Contents

Advertisement

. Erecting and folding the carrier

Erecting the Ready Chassis
Push down the axle socket with your left hand, and at the same
time push up the left frame tube using your right hand. then
pull the short lower side tube backwards with your left hand,
pressing against it from above with your right hand. repeat this
procedure on the right-hand side.
When pulling the short lower side tube backwards, the
auto-lock disk must audibly engage in each case.
auto-lock disk
the assembly of the cx requires particular attention. care
needs to be taken here that the brake cable (see section 4.10)
is not bent or damaged in some other way. it must run along the
frame tubes as illustrated.
take care not to bend the brake cable which connects the
handlebar with the passenger compartment on the cx. this
might reduce the braking effect, or the brake may not conti-
nue to function.
w ar n i n g
!
Before each journey make sure that both auto-lock disks
are engaged. if this does not happen, the passenger
compartment may collapse unintentionally in which your
passenger(s) could suffer serious injury or death.
n OT E


Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cougar 1Cheetah 2Cheetah 1Cx 2Cx 1

Table of Contents