Air Flow Louvers Adjustments - Hitachi RAS-S18CZT Instruction Manual

AIR FLOW LOUVERS ADJUSTMENTS

1
Adjustment of the conditioned air in the upward and downward
directions.
The horizontal air deÁ ector is automatically set to the proper
angle suitable for each operation. The deÁ ector can be swung
up and down continuously and also set to the desired angle
using the "
● If the "
the horizontal air deÁ ector swings up and down. If the
button is pressed again, the deÁ ector stops in its current
position. Several seconds (about 6 seconds) may be
required before the deÁ ector starts to move.
● Use the horizontal air deÁ ector within the adjusting range
shown on the right.
● When the operation is stopped, the horizontal air deÁ ector
moves and stops at the position where the air outlet
closes.
CAUTION
● In "Cooling" operation, do not keep the horizontal air
deÁ ector swinging for a long time. Some dew may form
on the horizontal air deÁ ector and dew may drop.
Adjustment of the conditioned air in the left and right directions.
2
● If the "
once, the vertical air deÁ ectors swing left and right to
parallel. If the button is pressed again, the deÁ ectors
stop in their current position. Several second (about 6
seconds) may be required before the deÁ ectors start to
move.
● PARALLEL SWING
(AUTO SWING)" button.
(AUTO SWING)" button is pressed once,
(PARALLEL SWING)" button is pressed
– 13 –
Horizontal air deÁ ector