Dehumidifying Operation - Hitachi RAC-60YHA3 Instruction Manual

DEHUMIDIFYING OPERATION

Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
■ Dehumidifying Function
● When the room temperature is higher than the temperature setting: The device will dehumidify the
room, reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at
the temperature setting slightly lower than the current room temperature, regardless of the temperature
setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature
becomes lower than the setting temperature.
●
The preset room temperature may not be reached depending on the number of people present in
the room or other room conditions.
Press the FUNCTION selector so that the display indicates
1
(DEHUMIDIFY).
The FAN SPEED is set at LOW or SILENT.
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
2
START
Press the
STOP
starts with a beep. Press the button again to stop operation.
■ As the settings are stored in memory in the remote controller, you
only have to press the
– 9 –
The range of 20~26ÝC is recommended as
the room temperature for dehumidifying.
(START/STOP) button. Dehumidifying operation
(START/STOP) button next time.