Hitachi RAC-60YHA3 Instruction Manual page 13

● The device will turn on
(off) and off (on) at the
designated times.
● The switching occurs
À rst at the preset time
that comes earlier.
● The arrow mark
appearing on the display
indicates the sequence
of switching operations.
The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set
●
the current time at À rst because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press the
●
(RESERVE) button in order to use the same settings next time.
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The (RESERVED) sign goes out with a beep and the
1 2
Press the Set the
(ON-OFF) turn-off time
button so that with the
the (OFF) TIMER control
mark blinks. button.
Press the
(RESERVE)
button.
3
Press
the (ON-
TIMER) button
so that the
(OFF) mark
lights and the
(ON) mark
blinks.
(TIMER) lamp turns off on the indoor unit.
– 13 –
4 5
Set the Point the signal
turn-on time window of the remote
with the controller toward the
TIMER control indoor unit, and press
button. the (RESERVE)
button.
The
starts lighting instead
of Á ashing and the
(RESERVED) sign
lights. A beep occurs
and the
lamp lights on the
indoor unit.
Example:
The device will turn off at 10:30 p.m.
and it will be turned on at 7:00 a.m.
The settings of the turn-on/off times
are now complete.
(CANCEL)
(ON) mark
(TIMER)