Tools Required - Dimplex ELECTRIC FIREPLACE User Manual

Tools required:

Philips screwdriver
1. Remove the front glass by removing the two outer screws holding the
glass clips (Figure A).
2. Remove the log grate by removing the two mounting screws (Figure B).
3. Remove the log set by lifting straight up (Figure C).
4. Slide the light assembly slightly out of the insert approximately 1".
5. Examine the bulb(s) to determine which bulb(s) require replacement.
6. Unscrew the bulbs counter clockwise.
7. Insert new bulbs.
8. Slide the light assembly back into the insert.
9. Replace the log set into the insert.
10. Reinstall the log grate
11. Reinstall the front glass.
Glass clip and
outer screw
Figure A
www.sylvane.com 1-800-934-9194
Log grate
mounting screw
Log grate
Figure B
8