Assembly Instructions - Country Hearth 2000 Owner's Operation And Instruction Manual

ASSEMBLY INSTRUCTIONS

Blower Assembly
THE BLOWER ASSEMBLY MUST BE DISCONNECTED FROM THE SOURCE OF ELECTRICAL SUPPLY BEFORE
ATTEMPTING THE INSTALLATION.
THE BLOWER ASSEMBLY IS INTENDED FOR USE ONLY WITH A STOVE THAT IS MARKED TO INDICATE SUCH USE.
DO NOT ROUTE THE SUPPLY CORD NEAR OR ACROSS HOT SURFACES!
Step 1.
Fix the assembly to the back of the stove with the four screws provided.
Pedestal Trim Assembly
Assemble trim pieces as shown with the screws provided
in the parts bag. Washers may not be necessary.
After trim assembly, attach to the pedestal base at
the location shown using the screws provided.
6
Ash Pan Assembly
Remove ash pan from firebox. Under the firebox, there
are two brackets; Slide the ash pan into these brackets.
Ussc