Sony DVP-CX985V Service Manual page 32

DVP-CX985V
5. Auto Adjustment
Auto Adjustment
1. Auto TRK. Offset
2. Auto FCS Balance
3. Auto Focus Offset
4. Auto Focus Gain
5. Auto TRK. Gain
6. Auto EQ.
7. Auto L.F. Offset
8. Auto Group Delay
9. Auto TRK. Balance
_ SA.------ SI.-- EMG.00
DVD SL 12cm
On this screen, each item can be adjusted automatically. Select the
[1] [8]
desired number to from the remote commander, and se-
lected item is adjusted automatically.
[1]
Auto TRK. Offset : Adjusts tracking offset.
[2]
Auto FCS Balance : Adjusts focus balance.
[3]
Auto Focus Offset : Adjusts focus offset.
[4]
Auto Focus Gain : Adjusts focus gain.
[5]
Auto TRK. Gain : Adjusts track gain.
[6]
Auto EQ : Adjusts EQ.
[7]
Auto L.F. Offset : Adjusts loop filter offset.
[8]
Auto Group Delay : Adjusts amount of group delay.
[9]
Auto TRK. Balance : Adjusts tracking balance.
32
Jitter FF
6. Memory Check
The display image is shown below and three screens in total can
be selected.
EEPROM Data 1
CD
Focus Gain xx
TRK. Gain xx
FCS Balance xx
Focus Bias xx
TRV. Offset xx
L.F. Offset xx
EQ. Boost xx
_ UP : Last Data
DOWN : Next Data
CLEAR : Default Set
EEPROM Data 2
CD
RF Jitter xx
RF Level xx
FE Level xx
FE Balance xx
TRV.Level xx
TE Gain xx
PI Level xx
_ UP : Prev Data
DOWN : Next Data
CLEAR : Default Set
EEPROM Data 3
CD
Analog FRSW xx
PLL Dac Gain xx
Mirror Time xx
TRK. Balance xx
THR A&L : xx
_ UP : Prev Data
DOWN : First Data
CLEAR : Default Set
On this screen, current servo adjusted data stored in the EEPROM
are displayed. The adjusted data are initialized by pressing the
[CLEAR]
key, but be careful that they are not recoverable after
initialization.
Before clearing the adjusted data, make a note of the set data. This
[0]
screen will also appear if
Adjustment. In this case, default setting cannot be made.
"THR A&L" data on the third page cannot be changed if default
setting is once made.
-- DL --
LCD SL L0 L1
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
page.1/3
-- DL --
LCD SL L0 L1
-- xx xx xx
-- xx -- --
-- xx -- --
-- xx -- --
-- xx -- --
xx -- -- --
-- xx xx --
page.2/3
-- DL --
LCD SL L0 L1
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx/xx xx xx
page.3/3
All is selected in the Drive Auto