Power Wheels Ford Mustang Owner's Manual With Assembly Instructions page 15

23
• Fit the fastener cap
onto the end of the
steering column.
3
• Insert a #8 x / " screw
4
through the large
opening in the fastener
cap and into the hole in the steering column. Tighten the screw.
• Turn the vehicle upright.
Steering Wheel
Steering Column
24
• Position the steering wheel so that the large opening is UP.
• Fit the steering wheel onto the steering column.
J4390pr-0920
ASSEMBLY
Fastener Cap
Large Opening
25
• While pressing down on the steering wheel, grasp the steering
column under the dash and pull it up as far as it will go.
• Insert the 5 / " x 1 1 / " pin through the hole in the steering column.
32 2
• Grasp the steering column again and pull down to fit the pin into the
center of the steering wheel.
Steering Wheel Cap
26
• Fit the steering wheel cap onto the center of the steering wheel.
• Insert two #8 x 3 / " screws and tighten.
4
Press Wheel
Lift Steering
Column
F
15