Getting Started - DSPeaker ANTI-MODE 2.0 DUAL CORE Owner's Manual

2.3 Getting Started

Anti-Mode 2.0 Dual Core can be utilized in many different kinds of configurations.
Before powering the device, please connect all the inputs and at least one of the
outputs that are relevant to your system.
Virtually all of the user interaction is carried out by using the remote controller. Below
are some commands that are commonly used throughout the interface:
Profile buttons (A-D)
➢ The MENU button brings out the main menu (press MENU again or the BACK
button to return back to home screen from the main menu)
➢ Directional arrow buttons change the active menu item
➢ The OK button accepts any changes made and advances to the next screen
➢ The BACK button returns to the previous screen
➢ The three color-coded buttons (blue, orange and green) select similarly colored
items in the various EQ editor screens. The primary actions of these buttons are
active in the home screen only (display, bypass and OUTPUT.)
When the device is powered up for the first time, the language selection screen
appears. Use the LEFT / RIGHT arrow buttons on the remote to select the language
and press OK to confirm. If needed, the language can be changed later from the
Settings menu.
It is highly recommended to perform the room calibration process right away.
Follow the steps described in the next "Typical Room Calibration" chapter.
Rev. 1.0 2013-06-04
A -M 2.0 D
NTI ODE
O
WNER
Menu navigation
Color-coded buttons
Standby
C
UAL ORE
' M
S ANUAL
Page 6 (32)