Settings Menu - DSPeaker ANTI-MODE 2.0 DUAL CORE Owner's Manual

4.Settings Menu

Access the Settings menu from the home screen by pressing the MENU button on the
remote, then use the arrow buttons to highlight Settings and press OK. Among other
things, this menu contains powerful tools for customizing the sound signature.
The House curve tool adjusts target curve for the low frequencies (bass).
The Tilt curve tool adjusts target curve for the higher frequencies (treble).
Enable or disable the built-in infrasonic filter. Select between three most
common cut-off frequencies (10 Hz, 15 Hz, and 20 Hz).
The Custom parametric equalizer tool creates filters with freely adjustable
center frequency, bandwidth and gain. Up to 16 independent filter slots are
available. Only recommended for advanced users.
Audio Settings modify channel balance, headroom, and dip compensation.
Homescreen: You can configure the arrow and OK button functions.
Input Settings: this menu allows to adjust analog input sensitivity, volume
trim, and the operation mode of the USB volume control.
The Lowpass or highpass tool. Create lowpass or highpass filters with the
desired characteristics. Two independent filter slots are available. Only
recommended for advanced users.
Language: Change the menu language.
Factory reset: clear all data from the selected sound profiles (the Anti-Mode
correction, custom settings etc.) Use with caution: this operation cannot
be undone.
System Info: Display firmware version and CPU usage information.
PC link: export the measurements to a computer via USB or perform system
update. System update requires separate software which is currently
available for Windows only. Visit
Rev. 1.0
www.dspeaker.com
2013-06-04
A -M 2.0 D
NTI ODE
O
WNER
for more information.
C
UAL ORE
' M
S ANUAL
Page 12 (32)