White Balance - DAGE-MTI DC-200 User Manual

For example, to change the shutter setting from off to auto:
1. Press
MENU. WHITE BALANCE
2. Press
DOWN. SHUTTER
3. Press
RIGHT. OFF
4. Press
UP
settings, when
5. Press
MENU
press
LEFT
items in a similar matter.
NOTE: When editing
CAMERA TITLE,
activate the adjustment cursor, then
values and
LEFT/RIGHT

White Balance

One Push: By pressing the
remote, the camera automatically white balances to the
present scene, then stores setting until
pressed again or camera power is turned off. When
camera power is turned back on a
cycle is performed. Pressing the
automatically changes the White Balance menu setting
from the previous setting to the
There must be adequate white area in the scene and
illumination to perform a white balance or the camera
will wait before completing the white balance. The
typical method of white balancing in this mode is to
set the illumination level, place a white object in the
scene (if there is not enough white in scene), then
press
ONE PUSH. ONE PUSH (AWB
readjusted when light intensity is changed.
will be flashing.
or to scroll through the available
DOWN
appears, stop.
AUTO
to store
AUTO
then or
UP
MANUAL WHITE BALANCE
an additional
to change characters as necessary.
will be flashing.
will be flashing.
and turn off display, or
to edit other menu
DOWN
press is needed to
RIGHT
UP/DOWN
ONE PUSH (AWB
ONE PUSH (AWB
ONE PUSH
ONE PUSH
and
to change
) on the
is
ONE PUSH
button
setting.
) should be
)