Camera Title - DAGE-MTI DC-200 User Manual

Back Light
If the scene has too much Back Light (light behind the
subject) the AGC (Automatic Gain Control) and Auto Shutter
circuits may adjust to the back light instead of the subject.
Use the Pattern which provides the best picture. The Back
Light function works only when AGC and/or Auto Shutter
are on and the illumination level is sufficient for the
automatic circuits to function.
Ptrn.1: Provides highest amount of compensation.
Ptrn.2: Provides moderate amount of compensation.
Off: Provides no Back Light compensation.

Camera Title

The Camera Title provides eight characters of lower or
upper case letters or numbers or symbols. To edit the title,
use the OSD Remote. Press
CAMERA TITLE
appears, then
will be flashing. Press
then press
RIGHT
until all characters have been edited. Press
store, or
LEFT
Iris
CCD Iris: This setting sets the camera into
SHUTTER
CS Mount: This setting sets the camera
. (changes shutter setting to off)
OFF
flashes, then
again. Now the first character of title
RIGHT
or
UP
to move to the next character. Repeat this
to return to other menu items.
. (changes shutter setting to auto)
, then
MENU DOWN
, then
RIGHT
to change the character,
DOWN
until
until
DOWN
to exit and
MENU
AUTO
to
SHUTTER
ON