Setup In Windows Nt - Axis OfficeBasic USB Wireless User Manual

Setup in Windows NT

AXIS OfficeBasic USB Wireless
9. If you already have the printer's driver installed, you will be asked whether
to keep it or to replace it. Click Next. Supply a name for the printer and choose
whether you want to make it your default printer. Click Next.
10. Choose whether you want to share the printer with other network users, print
a test page, etc. Select the appropriate radio button and click Next and Finish.
11. In AXIS OBW Wizard, finish the installation by highlighting the installed
printer in the Select a Printer list and click Next => Finish.
12. From Windows, go to Start | Printers (and Faxes) and highlight your newly
installed printer.
13. Right-click, select Properties and verify that the AXIS OfficeBasic USB
Wireless port appears as OBWXXXXXX-1 (the Xs represent the last six digits
of the print server's serial number).
14. Print a test page to verify the configuration.
If you wish to install more print servers, start AXIS OBW Wizard from your
Windows Start menu: Start | Programs | Axis Communications | AXIS OBW
Wizard and repeat the installation procedure.
1. Configure according to the description in Windows Setup, on page 13 until
you reach Figure: Select an already configured printer or click Add New
Printer, on page 15. Click Add New Printer to launch Windows Add Printer
Wizard.
2. Select My Computer and click Next.
3. Select LPT1 as Local Port and click Next.
4. Select Printer Manufacturer and Printer model, click Next and Finish.
5. In the AXIS OBW Wizard, select the newly added printer from the list, click
Next and Finish to complete the installation.
6. From Windows, go to Start | Settings | Printers and highlight your newly
installed printer.
Windows Setup
17