Reversing The Transmit And Receive Frequencies - Radio Shack HTX-252 Owner's Manual

REVERSING THE TRANSMIT AND
RECEIVE FREQUENCIES
To swap the input and output frequencies, press . For exam-
REV
ple, if you have set the transceiver to repeater operation on
146.94 MHz with a positive offset of 600 kHz, the transceiver
would normally receive on 146.94 MHz and transmit on 147.54
MHz. After you press the transceiver is set to receive on
REV,
147.54 MHz and transmit on 146.94 MHz.
This feature is useful if you want to determine whether you are
close enough to another station to communicate on a simplex fre-
quency. While the other station is transmitting, reverse the fre-
quencies. If you can still hear the other station, you are hearing
their signal directly and you do not need to use the repeater.
24