Scanning Operation; Scanning For Active Frequencies; Scanning Standard Memory Locations - Radio Shack HTX-252 Owner's Manual

SCANNING OPERATION

SCANNING FOR ACTIVE FREQUENCIES

1. To search for activity on a frequency, press
appears. The transceiver begins to scan up or down
SCAN
the full frequency range. The transceiver stops on each
active frequency for 5 seconds if squelch is on. If squelch is
off, the transceiver stops on each location for about 1 sec-
ond.
2. To change the scanning direction, press
3. To stop on a frequency or to stop scanning completely,
press again.
SCAN
SCANNING STANDARD MEMORY
LOCATIONS
1. Press then
MS (MR)
ory locations except empty locations.
2. To change the scanning direction, press
3. To stop scanning, press
or
UP
. The transceiver scans all mem-
SCAN
or
UP
again.
SCAN
.
SCAN (PRI)
.
DN
.
DN
27