Power outlet: To prevent electric shock, be sure the electrical plug used on the product power cord matches the electrical outlet used to supply power to the Aurora product. Use only the power adapter and power connection cables designed for this unit.
Please make sure the following items are included within your package. Contact your dealer if any items are missing or damaged. ASP-S123V Presentation Scaler x 1 Power Cord x 1 DXE-CAT-RX1 HDBaseT CAT Receiver x 1 (Not included in –NC model) Note: Go to www.auroramultimedia.com...
Video, S-Video, Component Video (YPbPr), VGA (Computer Graphics), and HDMI inputs which can be scaled to 1080p in VGA/HDMI format. In addition, the built in HDMI CAT extension, microphone input, and 20 Watt amplifier makes the ASP-S123V a complete cost effective solution for education, commercial, and digital signage.
User Guide Front Panel [ [ [ [ Power indicating LED. It is illuminated red when the unit is on. \ \ \ \ IR sensor window for remote ] ] ] ] Input selection LEDs. Input source selection buttons. Select video/audio source type HDMI, VGA, and Video. Signal channel selection buttons.
User Guide Rear Panel Two RCA connectors for stereo audio output, one VGA output, one HDMI output with embedded audio, one HDBaseT for HDMI extending (Not available on –NC model). \ \ \ \ Four VGA connectors for VGA inputs. ] ] ] ] Four HDMI connectors for HDMI inputs.
User Guide QUICK START Hardware Unpack the ASP-S123V from its carton making certain everything is included. If rack mounted find suitable space and mount using standard rack screws. Connect all audio and video inputs and outputs accordingly. Connect power cord.
User Guide OSD OPERATION Picture Settings The first icon from left of OSD menu is to set the picture parameter. It includes the picture mode preset, color temperature, contrast, brightness, hue, saturation, sharpness, scale, VGA setting and Advance picture adjust. Some parameters are available specific to the input type.
1. Copy the file to a USB flash disk. 2. Plug the USB flash disk to the USB port on ASP-S123V. 3. Pressing the button “HDMI” on the front panel for 6 seconds or send the RS232 command 0698% for update mode, then press the button “OK”...
User Guide APPENDIX 1 Troubleshooting Problem Solution a. Check that the power plug is properly inserted into a functioning 1. Front Panel does not work. power outlet. a. Check baud rate settings for the port 2. RS-232 does not have control b.
User Guide APPENDIX 2 Communication Protocol RS-232 Control Communication protocol: Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none Pinout: 2=Rx, 3=Tx, 5=Gnd Command Feedback (ASCII) Function Description (example) (ASCII) LINE Mute On 0600% MUTE Line LINE Mute Off 0601% UnMute Line LINE Volume: XX...
Page 15
User Guide XXXXXXXX 0633% Check the image mode Picture Mode : XX 0634% Check the audio mode Sound Mode: XX 0635% Check the image aspect ratio Aspect Ratio: XX 0636% Check the brightness Brightness: XX 0637% Check the contrast Contrast: XX 0638% Check the saturation Saturation: XX...
Limited 3 Year Warranty Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. This Limited Warranty covers products purchased in the year of 2009 and after.
Page 20
User Guide This page is intentionally left blank.