LG WT-R10(~3)3(7)1(3,5)TP(H) Service Manual page 43

Hall Sensor
Stator Housing
Water Guide
SNAP RING.
7) Replacement of Bearing housing asm
43
Loosen the 6 fixing screws on the stator.
(Lower upper position screws)
Check the direction of SNAP RING.
(The handle of snap ring is toward to rotor and
stator.)
Preventing fallen the stator, tighten with one hand
and then loosen the last screw.
For assembly take care lead wire's state,
it produce a noise and cut attach the rotor.
Loosen 14 Fixing screws on the Bearing Housing
ASM and pull up it.