LG WT-R10(~3)3(7)1(3,5)TP(H) Service Manual page 42

6) Replacement of Rotor & Stator
Disassemble rotor nut with boxer(M18) or spaner.
( In assembled, the force is over than 200kgf.cm)
Disassemble rotor, pull out the rotor as shown the
figure.
Fixing Bolt
Disconnect the drain motor wire, loose fixing screw
Water Guide
and disassemble the water guide & drain motor.
Before disassemble stator, disconnect the hall
sensor and stator housing.
Stator Housing
Hall Sensor
42