Fujitsu PRIMERGY BX620 S5 Options Manual page 46

Replacing a storage module
Removal
Figure 30: Undoing the screws on the storage module
Figure 31: Removing the storage module
Installation
To install a storage module, follow the steps in reverse order.
46
1
1
Options Guide
Ê Undo the two screws (1) which
fasten the storage module to the
frame of the server blade.
Ê Undo the screw (2) on the front
panel of the storage module.
Ê Open out the front panel (1) as
shown in the figure. This unlocks
the storage module.
Ê Pull the storage module out of the
server blade chassis (2).
Storage modules
BX620 S5